Safety Standards for Climbing Robots

Dual‑operator procedure required: one person controls the robot, and one person monitors the high‑pressure water and the safety rope. Overpressure and overload are strictly prohibited: pressure must not exceed the equipment’s rated limit, and the load must not exceed 100 kg; the fall‑arrest rope must be securely anchored independently. Stay clear of hazardous areas: high‑pressure water jets must never be directed at personnel; a warning zone must be established beneath the work area, and no one is allowed to stand there. Regularly inspect the safety rope: check for wear before each use, and replace it every six months.

Dual-person operation is required: one person operates the robot, and the other monitors the high-pressure water and the safety rope.
Overpressure and overload are strictly prohibited: pressure must not exceed the equipment’s rated limit, and the load must not exceed 100 kg. The fall‑arrest rope must be securely anchored independently.
Stay clear of hazardous areas: High-pressure water jets are prohibited from being directed at people; establish a safety cordon beneath the work zone and prohibit personnel from standing there.
Regularly inspect the safety rope: check for wear before each use, and replace it every six months.